Some tips on 49679-45-0

The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

49679-45-0, Ethyl 3-chloroquinoxaline-2-carboxylate is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,49679-45-0

General procedure: Method A: a solution of compound 3 (1.11 g, 4.70 mmol), 3- aminophenol (622 mg, 5.70 mmol) and p-TSA, as a catalyst, in absolute ethanol (40 mL) was refluxed for 110 h. Ethanol was then evaporated under reduced pressure, and the resulting residue was purified by silica column chromatography using cyclohexane with ethyl acetate gradient (0e50%) as eluent to give the desired compound 4a (1.0 g, 69%) as a red powder.

The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Oyallon, Bruno; Brachet-Botineau, Marie; Loge, Cedric; Bonnet, Pascal; Souab, Mohamed; Robert, Thomas; Ruchaud, Sandrine; Bach, Stephane; Berthelot, Pascal; Gouilleux, Fabrice; Viaud-Massuard, Marie-Claude; Denevault-Sabourin, Caroline; European Journal of Medicinal Chemistry; vol. 154; (2018); p. 101 – 109;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Simple exploration of 49679-45-0

49679-45-0, The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.

(1) To a solution of ethyl 3-chloroquinoxaline-2-carboxylate prepared by a method recited in J. Chem. Soc. 1945, 622; 12.3 g, 52.0 mmol and triethylamine (8.70 mL, 62.4 mmol) in N,N-dimethylformamide (52 mL) was added aqueous dimethylamine (50%, 6.60 mL, 62.7 mmol) at room temperature. After being stirred for 3 hour at room temperature, the reaction mixture was poured into water (500 mL), and the mixture was extracted with ethyl acetate (2000 mL). The organic layer was washed with water, dried over sodium sulfate, filtrated and concentrated in vacuo. The residue was purified by silica gel column chromatography (hexane:ethyl acetate = 4:1) to give ethyl 3-(dimethylamino)quinoxaline-2-carboxylate as a pale yellow oil (12.6 g, 99%). MS (APCI): m/z 246 (M+H).

49679-45-0, The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MITSUBISHI TANABE PHARMA CORPORATION; MORIMOTO, Hiroshi; SAKAMOTO, Toshiaki; HIMIYAMA, Toshiyuki; KAWANISHI, Eiji; MATSUMURA, Takehiko; WO2010/30027; (2010); A1;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Downstream synthetic route of 49679-45-0

49679-45-0, 49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.

EXAMPLE 5 (Process B) Preparation of ethyl 3-(4,6-dimethoxypyrimidin-2-yloxy)quinoxaline-2-carboxylate (Compound No. 762) 100 ml of N,N-dimethylformamide was added to 2.3 g (9.72 mmol) of ethyl 3-chloroquinoxaline-2-carboxylate, 2.0 g (12.8 mmol) of 4,6-dimethoxy-2-hydroxypyrimidine and 1.8 g (13.0 mmol) of potassium carbonate, and the mixture was heated and stirred at 100 C. for 23 hours. After cooling, the reaction solution was poured into water, extracted with ethyl acetate, washed with water and a saturated sodium chloride aqueous solution, and then dried over anhydrous sodium sulfate. Then, the solvent was distilled off under reduced pressure, and the residue was purified by column chromatography to obtain 2.2 g (yield: 64.7%) of the desired product. Refractive index: 1.5933.

49679-45-0, 49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various fields.

Reference£º
Patent; Kumiai Chemical Industry Co., Ltd.; Ihara Chemical Industry Co., Ltd.; US5527763; (1996); A;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

New learning discoveries about 49679-45-0

49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various.

49679-45-0, Ethyl 3-chloroquinoxaline-2-carboxylate is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,49679-45-0

General procedure: Method A: a solution of compound 3 (1.11 g, 4.70 mmol), 3- aminophenol (622 mg, 5.70 mmol) and p-TSA, as a catalyst, in absolute ethanol (40 mL) was refluxed for 110 h. Ethanol was then evaporated under reduced pressure, and the resulting residue was purified by silica column chromatography using cyclohexane with ethyl acetate gradient (0e50%) as eluent to give the desired compound 4a (1.0 g, 69%) as a red powder.

49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various.

Reference£º
Article; Oyallon, Bruno; Brachet-Botineau, Marie; Loge, Cedric; Bonnet, Pascal; Souab, Mohamed; Robert, Thomas; Ruchaud, Sandrine; Bach, Stephane; Berthelot, Pascal; Gouilleux, Fabrice; Viaud-Massuard, Marie-Claude; Denevault-Sabourin, Caroline; European Journal of Medicinal Chemistry; vol. 154; (2018); p. 101 – 109;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Brief introduction of 49679-45-0

49679-45-0, As the paragraph descriping shows that 49679-45-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To ethyl 3-chloroquinoxaline-2-carboxylate 1 (1 g, 4.22 mmol),appropriate acetylene derivative (3.33 mmol, 1.5 eq.) in ethanol(15 mL) was added in a two-necked flask containing triethylamine(1.4 mL, 10 mmol), Pd/C (45 mg, 0.42 mmol), triphenylphosphine(110 mg, 0.42 mmol), and CuI (50 mg, 0.26 mmol). The reaction mixture was stirred at 60 C for 5 h. After cooling, the mixture wasfiltered with celite and the filtrate diluted with dichloromethane,washed with H2O (3 x 40 mL) and dried over MgSO4. After evaporation,the crude product was purified by silica gel chromatography(CH2Cl2).

49679-45-0, As the paragraph descriping shows that 49679-45-0 is playing an increasingly important role.

Reference£º
Article; Hajri, Majdi; Esteve, Marie-Anne; Khoumeri, Omar; Abderrahim, Raoudha; Terme, Thierry; Montana, Marc; Vanelle, Patrice; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 959 – 966;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Simple exploration of 49679-45-0

The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To ethyl 3-chloroquinoxaline-2-carboxylate 1 (1 g, 4.22 mmol),appropriate acetylene derivative (3.33 mmol, 1.5 eq.) in ethanol(15 mL) was added in a two-necked flask containing triethylamine(1.4 mL, 10 mmol), Pd/C (45 mg, 0.42 mmol), triphenylphosphine(110 mg, 0.42 mmol), and CuI (50 mg, 0.26 mmol). The reaction mixture was stirred at 60 C for 5 h. After cooling, the mixture wasfiltered with celite and the filtrate diluted with dichloromethane,washed with H2O (3 x 40 mL) and dried over MgSO4. After evaporation,the crude product was purified by silica gel chromatography(CH2Cl2).

The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Hajri, Majdi; Esteve, Marie-Anne; Khoumeri, Omar; Abderrahim, Raoudha; Terme, Thierry; Montana, Marc; Vanelle, Patrice; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 959 – 966;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Analyzing the synthesis route of 49679-45-0

As the paragraph descriping shows that 49679-45-0 is playing an increasingly important role.

49679-45-0, Ethyl 3-chloroquinoxaline-2-carboxylate is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,49679-45-0

STEP A: 1-carbethoxycarbonylmethyl-2-amino-3-carbamoyl-quinoxalinium bromide A solution of 1 g of 2-amino-3-carbamoyl-quinoxaline prepared from 2-chloro-3-carbethoxy-quinoxaline by the method of Gowenlock et al [J. Chem. Soc., 1945, p. 622-5] in 50 ml of dimethoxy ethane and ethyl bromopyruvate was stirred for 2 days and was filtered to obtain 1.44 g of 1-carbethoxycarbonylmethyl-2-amino-3-carbamoyl-quinoxalinium bromide as a yellow crystalline solid.

As the paragraph descriping shows that 49679-45-0 is playing an increasingly important role.

Reference£º
Patent; Roussel Uclaf; US4254123; (1981); A;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Simple exploration of 49679-45-0

The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.,49679-45-0

2-[(Imino(methylamino)methyl)thio]-3-quinoxalinecarboxylic acid ethyl ester, hydrochloride 2-Chloro-3-quinoxalinecarboxylic acid ethyl ester (4.733 g., 0.02 mole) and 1.803 g. (0.02 mole) of monomethylthiourea were dissolved in 100 ml. of acetone and the solution as stirred at reflux for 11/2 hours, cooled, and filtered to give 5.62 g. of crude solid. Extraction of the crude solid with boiling acetonitrile left 3.14 g. of insoluble product, m.p. 180 (dec.).

The synthetic route of 49679-45-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; American Home Products Corporation; US4349674; (1982); A;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Downstream synthetic route of 49679-45-0

49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: Method A: a solution of compound 3 (1.11 g, 4.70 mmol), 3- aminophenol (622 mg, 5.70 mmol) and p-TSA, as a catalyst, in absolute ethanol (40 mL) was refluxed for 110 h. Ethanol was then evaporated under reduced pressure, and the resulting residue was purified by silica column chromatography using cyclohexane with ethyl acetate gradient (0e50%) as eluent to give the desired compound 4a (1.0 g, 69%) as a red powder.

49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various.

Reference£º
Article; Oyallon, Bruno; Brachet-Botineau, Marie; Loge, Cedric; Bonnet, Pascal; Souab, Mohamed; Robert, Thomas; Ruchaud, Sandrine; Bach, Stephane; Berthelot, Pascal; Gouilleux, Fabrice; Viaud-Massuard, Marie-Claude; Denevault-Sabourin, Caroline; European Journal of Medicinal Chemistry; vol. 154; (2018); p. 101 – 109;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

Downstream synthetic route of 49679-45-0

49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.49679-45-0,Ethyl 3-chloroquinoxaline-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To ethyl 3-chloroquinoxaline-2-carboxylate 1 (1 g, 4.22 mmol),appropriate acetylene derivative (3.33 mmol, 1.5 eq.) in ethanol(15 mL) was added in a two-necked flask containing triethylamine(1.4 mL, 10 mmol), Pd/C (45 mg, 0.42 mmol), triphenylphosphine(110 mg, 0.42 mmol), and CuI (50 mg, 0.26 mmol). The reaction mixture was stirred at 60 C for 5 h. After cooling, the mixture wasfiltered with celite and the filtrate diluted with dichloromethane,washed with H2O (3 x 40 mL) and dried over MgSO4. After evaporation,the crude product was purified by silica gel chromatography(CH2Cl2).

49679-45-0 Ethyl 3-chloroquinoxaline-2-carboxylate 12283436, aquinoxaline compound, is more and more widely used in various.

Reference£º
Article; Hajri, Majdi; Esteve, Marie-Anne; Khoumeri, Omar; Abderrahim, Raoudha; Terme, Thierry; Montana, Marc; Vanelle, Patrice; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 959 – 966;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider