Category: 91-19-0

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.91-19-0,Quinoxaline,as a common compound, the synthetic route is as follows.

91-19-0, Quinoxaline (0.65g, 5 mmol), pyruvic acid (1.32g, 15 mmol), AgNO3 (0.068g, 0.4 mmol), (NH4) 2S2O8 (1.71g, 7.5 mmol), CF3CO2H (1.7g, 15 mmol) were dissolved in a 1 : 1 mixture of DCM/H2O (50ml). The reaction mixture was stirred at 40 C. After cooling to room temperature the mixture was extracted with DCM, washed with brine and dried over Mg S04, then evaporated to give 1-quinoxalin-2-yl-ethanone (0. 89g, 100%).

91-19-0 Quinoxaline 7045, aquinoxaline compound, is more and more widely used in various fields.

Reference£º
Patent; F2G LTD; WO2005/92304; (2005); A2;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.91-19-0,Quinoxaline,as a common compound, the synthetic route is as follows.,91-19-0

Bromine (3.84g, 24mmol) was added dropwise to a magnetically stirred refluxing mixture of quinoxaline (1) (390mg, 3.0mmol) and barium carbonate (1.20g, 6.1mmol) in acetonitrile (20mL). The resulting reaction mixture was heated at reflux temperature for 25h and allowed to warm to room temperature. The solvent was evaporated and the mixture was diluted with a saturated solution of sodium carbonate (10mL). The mixture was extracted with ethyl acetate (3¡Á25mL) and combined organic layers were washed with water, dried over Na2SO4 and concentrated. The residue was purified via column chromatography on silica gel (100g) by eluting with 15% EtOAc/n-hexane. The first fraction was 6-bromoquinoxaline (10) (195mg, 31%) data as before. The second fraction was 5,8-dibromoquinoxaline (12) (45mg, 5%) data as before. The third fraction was 6,7-dibromoquinoxaline (13) (50mg, 6%) data as before. The fourth fraction was 5,7-dibromoquinoxaline (11) (120mg, 14%) data as before. The fifth fraction was 5,6-dibromoquinoxaline (14) (240mg, 28%) data as before.

The synthetic route of 91-19-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

91-19-0, Quinoxaline is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A solution of quinoxaline (1) (390mg, 3.0mmol), NBS (390mg, 3.0mmol), and benzoyl peroxide (catalytic amount) in glacial acetic acid (10mL) was heated at reflux temperature for 20h. The reaction was monitored by TLC or 1H NMR spectroscopy. The resulting reaction mixture was allowed to cool to room temperature and the solvent was removed under reduced pressure. The mixture was diluted with a saturated solution of sodium carbonate (10mL) and the mixture was extracted with ethyl acetate (2¡Á25mL). Combined organic layers were washed with water, dried over Na2SO4 and concentrated. 6-Bromoquinoxaline (10) (315mg, 50%) was obtained as a sole product. The reaction was repeated using DMF as a solvent at the same reaction condition and monobromide 10 was obtained in 51% yield., 91-19-0

As the paragraph descriping shows that 91-19-0 is playing an increasingly important role.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

91-19-0,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.91-19-0,Quinoxaline,as a common compound, the synthetic route is as follows.

General procedure: Bromine was added dropwise to a magnetically stirred refluxing solution of quinoxaline (1) or tetrahydroquinoxaline 15 or 19 in the relevant solvent. The resulting reaction mixture was heated at reflux temperature. The reaction was monitored by TLC or 1H NMR spectroscopy. After the desired time, the resulting reaction mixture was allowed to cool to room temperature and the solvent was removed under reduced pressure. The mixture was diluted with a saturated solution of sodium carbonate (10mL) and the mixture was extracted with ethyl acetate (2¡Á25mL). Combined organic layers were washed with water, dried over Na2SO4 and concentrated. The crude was purified appropriate method described in below.

91-19-0 Quinoxaline 7045, aquinoxaline compound, is more and more widely used in various fields.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

91-19-0, Quinoxaline is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

91-19-0, General procedure: A solution of quinoxaline (1) (390mg, 3.0mmol), NBS (390mg, 3.0mmol), and benzoyl peroxide (catalytic amount) in glacial acetic acid (10mL) was heated at reflux temperature for 20h. The reaction was monitored by TLC or 1H NMR spectroscopy. The resulting reaction mixture was allowed to cool to room temperature and the solvent was removed under reduced pressure. The mixture was diluted with a saturated solution of sodium carbonate (10mL) and the mixture was extracted with ethyl acetate (2¡Á25mL). Combined organic layers were washed with water, dried over Na2SO4 and concentrated. 6-Bromoquinoxaline (10) (315mg, 50%) was obtained as a sole product. The reaction was repeated using DMF as a solvent at the same reaction condition and monobromide 10 was obtained in 51% yield.

91-19-0 Quinoxaline 7045, aquinoxaline compound, is more and more widely used in various fields.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

91-19-0,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.91-19-0,Quinoxaline,as a common compound, the synthetic route is as follows.

Step 11 -(quinoxalin-2-yl)ethanone (JS110)Quinoxaline (1 .1864 g, 9.1 1 mmol), Pyruvic acid (1.90 ml, 27.3 mmol), AgN03 (0.124 g, 0.73 mmol), N2H8S208 (3.12 g, 13.67 mmol) and H2S04 (0.49 ml, 9.1 1 mmol) were stirred in 1 :1 CH2CI2/H20 (150 ml) at 40 C for 2 ? h. The solution was then basified via the addition of NaOH and the organics extracted (3x) and washed brine, dried (MgS04), filtered and solvent removed. Flash chromatography (Pet Ether; 3:1 Pet Ether/EtOAc) afforded the title compound as a yellow solid (617.5 mg, 3.91 mmol, 42.9%). Mpt: 70-74 C [Lit.( J. Org. Chem., 1991 , 56, 2866-2869) 76-97 C]; Rf = 0.24 (3:1 Pet Ether/EtOAc); IR (vmax/cm”1, thin film): 1689 (CO stretch), 1357; 1H NMR (500 MHz, CDCI3): deltaEta = 2.84 (s, 3H, 12-H), 7.82-7.90 (m, 2H, 7,8-H), 8.14-8.21 (m, 2H, 6,9-H), 9.47 (s, 1 H, 3-H); 13C NMR (125 MHz, CDCI3): 5C = 25.6 (C-12), 129.5 (C-6), 130.5 (C-8), 130.8 (C-9), 132.3 (C-7), 141 .1 (C-10), 143.1 (C-3), 143.9 (C-5), 146.6 (C- 2), 199.8 (C-11 ); LRMS m/z (El+): 172 [M]+, 130 [M-Ac]+, 86; HRMS m/z (El+): Found 172.06372; Ci0H8N2O requires 172.0631 1 ; Anal. Calcd. for Ci0H8N2O: C, 69.76; H, 4.68; N, 16.27. Found C, 69.28; H, 4.56; N, 16.00%.

The synthetic route of 91-19-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; UCL BUSINESS PLC; BIRKBECK COLLEGE; WAKSMAN, Gabriel; TABOR, Alethea; SAYER, James; WALLDEN, Karin; WO2012/168733; (2012); A1;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.91-19-0,Quinoxaline,as a common compound, the synthetic route is as follows.

91-19-0, A solution of quinoxaline (1) (390mg, 3.0mmol), NBS (390mg, 3.0mmol), and benzoyl peroxide (catalytic amount) in glacial acetic acid (10mL) was heated at reflux temperature for 20h. The reaction was monitored by TLC or 1H NMR spectroscopy. The resulting reaction mixture was allowed to cool to room temperature and the solvent was removed under reduced pressure. The mixture was diluted with a saturated solution of sodium carbonate (10mL) and the mixture was extracted with ethyl acetate (2¡Á25mL). Combined organic layers were washed with water, dried over Na2SO4 and concentrated. 6-Bromoquinoxaline (10) (315mg, 50%) was obtained as a sole product. The reaction was repeated using DMF as a solvent at the same reaction condition and monobromide 10 was obtained in 51% yield.

91-19-0 Quinoxaline 7045, aquinoxaline compound, is more and more widely used in various fields.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.91-19-0,Quinoxaline,as a common compound, the synthetic route is as follows.

91-19-0, General procedure: Heterocycle (0.10mmol,1equiv)ammonium persulfate (0.30 mmol, 3 equiv), Cs2CO3(0.20mmol,2 equiv)were placed in a dry glass tube.Then, anhydrous DMSO1 mL) and2,2-diethoxyacetic acid (0.7mmol7equiv), wereinjected into the tube by syringe under a N2atmosphere.The solution was then stirred at roomtemperature under the irradiation of 15W blueLEDs strip for 24h.After completion of the reaction,the mixture was quenched by addition of1.2mL of 3.0 M HCl, stirred for 20hthen saturated Na2CO3solution was added to adjust pH tobasicextract with CH2Cl2,the combined organic layers was washed with brine, then dry overanhydrous Na2SO4. The desired products were obtained in thecorresponding yields afterpurification by flashchromatography on silica gel eluting with petroleum and ethylacetate.

The synthetic route of 91-19-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Jia, Wei; Jian, Yong; Huang, Binbin; Yang, Chao; Xia, Wujiong; Synlett; vol. 29; 14; (2018); p. 1881 – 1886;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

91-19-0, Quinoxaline is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A solution of quinoxaline (1) (390mg, 3.0mmol), NBS (390mg, 3.0mmol), and benzoyl peroxide (catalytic amount) in glacial acetic acid (10mL) was heated at reflux temperature for 20h. The reaction was monitored by TLC or 1H NMR spectroscopy. The resulting reaction mixture was allowed to cool to room temperature and the solvent was removed under reduced pressure. The mixture was diluted with a saturated solution of sodium carbonate (10mL) and the mixture was extracted with ethyl acetate (2¡Á25mL). Combined organic layers were washed with water, dried over Na2SO4 and concentrated. 6-Bromoquinoxaline (10) (315mg, 50%) was obtained as a sole product. The reaction was repeated using DMF as a solvent at the same reaction condition and monobromide 10 was obtained in 51% yield., 91-19-0

As the paragraph descriping shows that 91-19-0 is playing an increasingly important role.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider

91-19-0, Quinoxaline is a quinoxaline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

91-19-0, General procedure: A solution of quinoxaline (1) (390mg, 3.0mmol), NBS (390mg, 3.0mmol), and benzoyl peroxide (catalytic amount) in glacial acetic acid (10mL) was heated at reflux temperature for 20h. The reaction was monitored by TLC or 1H NMR spectroscopy. The resulting reaction mixture was allowed to cool to room temperature and the solvent was removed under reduced pressure. The mixture was diluted with a saturated solution of sodium carbonate (10mL) and the mixture was extracted with ethyl acetate (2¡Á25mL). Combined organic layers were washed with water, dried over Na2SO4 and concentrated. 6-Bromoquinoxaline (10) (315mg, 50%) was obtained as a sole product. The reaction was repeated using DMF as a solvent at the same reaction condition and monobromide 10 was obtained in 51% yield.

91-19-0 Quinoxaline 7045, aquinoxaline compound, is more and more widely used in various fields.

Reference£º
Article; Ucar, Sefa; E?siz, Selcuk; Da?tan, Arif; Tetrahedron; vol. 73; 12; (2017); p. 1618 – 1632;,
Quinoxaline – Wikipedia
Quinoxaline | C8H6N2 | ChemSpider